MKCD-2020 is designed to measure the thickness of case-hardened layer and is capable of measure depths ranging from 1.5mm up to a maximum of 8mm.
MKCD-2020 provides inspectors accurate and immediate reading of case depth hardened layer.
Its compact physical dimension and simple to use operation make on-site inspection easy and swift.
It also provide B-Scan image of the tested marital that represent the cross-section of scanned area. By implementing mean value averaging process the case depth thickness is instantly calculated and displayed.
Probes are specially deigned for case depth measuring and customized as customers needs.
경화 깊이 측정
용접부 두께 측정
Provides instant and accurate data of Case depth hardened layer.
High energy pulser and low noise receiver generates sharp ultrasonic signal
which provide stable reading of thickness data
Ultrasonic B-Scan Image gives valuable data of the physical condition of tested marital.
Portable and compact housing make it easy to use and carry.
Case depth measurement range: 1.5mm ~ 8mm
Frequency range: 10 ~ 20 MHz
Pulse amplitude: 70 ~ 260 Volt
Pulse width: 30 ~ 90 ns
Gain: 0 to 100dB in 1dB steps
Wave form: full wave and unrectified RF.
Pulse repetition frequency: 1 ~ 1000 Hz